Heat Pumps or Electric Heaters: Which One is Better?

Heat Pumps or Electric Heaters
HVAC & PlumbingSlider

The indoor climate is one of these topics that you probably don’t pay much focus on until you are uneasy. If the warmth stops working or the kind of heating unit you use doesn’t work really well, then you want to find a good way to keep your living room comfortable. For this reason, you need to consider what is the best, a heat pump with an electric furnace?

Heat Pump System

Heat pumps use electricity but not in the traditional form of electrically-heated coils that warm a room. A heat pump system functions like a fridge, using electricity to move heat from a cool space to a warm area, making the

cool space cooler

as well as also the warm space warmer. The heat pump efficiency factor is pretty high, and heat pumps tend to be more affordable than other kinds of heat.

There are three types of heat pumps: Air-to-air, water supply, and geothermal. The air-source heat pump is the one that you usually see in the new structure. These heat pumps transfer heat between indoor and outdoor air and can decrease electricity usage in several cases by about 50 percent compared to furnaces and baseboard electric heaters. Heat pumps also double as air conditioners, and are good at dehumidifying the air better than standard central air conditioners. Air-source heat pumps have existed for many decades, but until recently, their heating ability in areas with cold winters has not been dependable. Technology has changed, and now air-source heat pumps can offer a good form of heat in winter.

A heat pump uses less power than a typical electrical furnace. If you have a heat pump that utilizes electric backup heat, it probably uses electric heat strips, which use a great deal of electricity. Depending on how cold your winters are, you may not use this often. The advantage of the heat pump is that it gives you the air conditioner at the same unit. You will need either the heating strips or an auxiliary heating system, in case your winter temperatures often dip into 10 to 25 degrees, based on how big your heat pump.

Your heat pump size is essential. Check to be certain you’re installing the right size heat pump to fit your living area. If it’s too large or too small, it won’t work right. Heat pumps are sized to heat an average number of square feet, and you also want to be certain that your living space fits comfortably within that average. Heat pumps are most efficient if your home is well-insulated along with your ductwork is installed correctly. Improperly installed ductwork can flow up to 30 percent of their heat.

Mini Split Heat Pump

If your home is older or doesn’t have ducts, there is a ductless variant of air-source heating pumps known as a mini-split. These can be set up into additions. They are visible inside, though they may be set up high on a ceiling or wall. They can be costly, but tax incentives can bring the cost down. They are quiet sources of heating and air conditioning.

Geothermal Heat Pump

A geothermal heat pump system costs more to install, but these are highly efficient systems that transfer heat between the house and the ground or nearby water supply. These systems can reduce energy usage by 30 to 60 percent, control humidity, and fit into a variety of homes. These may also be utilized in much more extreme climates compared to air-source heat pumps.

There’s even a heat pump that is not powered by electricity. Absorption heat pumps use heat powered by natural gas, propane, solar-heated water, or geothermal-heated water. It employs the ammonia-water absorption cycle to provide cooling and heating. It is not pumped upward in a compressor, but instead, absorbed into the water. The heat boils the ammonia from the water.

Electric Heat

Electric heat can be installed either through baseboard heaters or via a central furnace. An electric furnace is going to be 100 percent effective but will probably be more costly than a heat pump. An electric furnace functions as a big hairdryer, producing heat with electric heating components. The benefit over a heat pump would be the air is typically warmer than airborne from a heat pump system.

Room electric heaters are simple to install and the lowest priced kind of heat to install. Electric baseboard or wall heaters are often used to supplement central heating systems or as the main heat in small houses in cold climates. If you’re adding on to your house, an electric baseboard heater is an efficient way to warm your new space. Adding ducts into a heat pump or furnace for a forced hot air heating system may alter the airflow through the ducts. Additionally, closing off vents at a forced hot air system to rooms that you do not use can cause a strain on your furnace.

The rate of heat may be more expensive, but that is usually offset by cheaper setup costs. Electric heaters and furnaces also need little maintenance and typically last longer than other types of heaters. Electric heat is 100 percent effective, so none of the heat is wasted. Natural gas and oil typically have at least 3 percent heat reduction and frequently lose 10 to 20 percent. Furnaces that operate on natural gas and petroleum can decrease in efficacy as they age. Electric plants are often powered by coal, oil, and gas, but that may change as more types of renewable energy enter the market.

Ideal Temperature

In the winter, the ideal temperature to warm your home is 68 degrees. Lowering your thermostat by 10 to 15 degrees at night or while you’re away will save 5 to 15 percent of your heating bill.

Leave a Reply